Skip to content

Phelps3D Decepticon G1 Transformers Dirge Parts

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

These were FDM and Resin printed parts for my G1 Dirge figure. The wings were printed using a wood fill filament.

I was using the Longer Orange 10 3D Printer and Longer Standard Resin.

Please note that while resin 3D printing is more accurate with details, they can still vary greatly from print to print.

This is mostly due to the “bleed” factor of the UV light exposure. What I did was to take the still slightly uncured parts and place them into their post holes to sort of “scrape” away excess prior to fully curing them under a UV lamp. (Note also that the white tends to change color after curing. Mine had a bit of a yellowish/red coloration. Sunlight UV curing may be a better option for white.)

Also, standard resins are quite brittle and do not have much flex to them. I made sure to run a 5 mm drill bit through the holes after curing to ensure their tolerance was correct. I did it after because there is always some shrinkage when the objects cure.

3D printing settings

0.2 mm layer height on the FDM wings 10% Infill
0.05 mm layer height on the resin black with 15 seconds exposure time.

3D printer file information

  • 3D design format: STL Folder details Close
    • G1DirgeLeftWing (repaired).stl
    • G1DirgeMissile (repaired).stl
    • G1DirgeRightWing (repaired).stl
    • G1SeekerCockpit (repaired).stl
    • G1SeekerLandingGearPost (repaired).stl
    • G1SeekerLandingGearWheels (repaired).stl
    • G1SeekerLeftHand (repaired).stl
    • G1SeekerNosecone (repaired).stl
    • G1SeekerRightHand (repaired).stl

    Learn more about the formats

  • Publication date: 2021/01/18 at 23:21





Designs 265
Downloads 754
Sales US$189
Followers 31

3D Printing Nerd, been using FreeCAD since 0.13. Work with both FDM and Resin 3D printers. Can do commissions, but mostly non-organic models.

Issue with this design? Report a problem

Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!