Skip to content

Openlock Tudor Tiled Roof - Set 2

?
Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.7k views
  • 1 like
  • 94 downloads

3D model description

This is the second set of OpenLock Tudor roof tiles I've made - the first one is https://www.thingiverse.com/thing:3608343

This set fills a gap in what the first set can do; it allows you to make a roof where the end is an even number of tiles wide. It switches the ridge tiles of the first set for narrower ones, with the standard flat roof tile, edges etc then being connected to the new ridge tiles to make your roof. Such a simple thing, and so fiddly to design !

The set consists of 4 pieces, the first two of which are likely to be the most used;;

  • A rooftop tile, 2 inches wide.
  • A rooftop end tile with gable section - this will fit on top of two of the gable side pieces from Set 1.
  • A rooftop end tile without gable section -A small section of gable end; I mainly included it because although it was a "development" piece, I can see it being useful on larger buildings as an internal support.

You shouldn't need to add supports to print these pieces, although there are some supports I've built into the designs in the OpenLock ports which you'll need to remove. I usually print with a brim to improve adhesion.

3D printer file information

  • 3D design format: STL Folder details Close
    • Even_E_Rooftop.stl
    • Even_Gabletop.stl
    • Even_Roofedge_Gabled.stl
    • Even_Rooftop_Edge.stl

    Learn more about the formats

  • Publication date: 2020/02/20 at 15:04

License

CC BY

Tags

Creator

Hi ! My name is Sean. I started 3D printing because I wanted to create and print things to support my love of Dungeons and Dragons.

After printing some wonderful designs by other talented people, I found there were gaps - things I wanted but couldn't find designs for. So I started making a few creations of my own. I hope you like them ! I test print everything on my trusty Ender 3 before publishing.

Issue with this design? Report a problem

Best sellers of the category Game


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!