NES Controller Grip

A friend wanted a more comfortable grip for his NES. Due to other grips lacking comfort, I made this one.

It is designed to hold the controller pretty well but you will have to put a piece of foam on the left or right. This is to prevent controllers getting stuck or fitting too tight that it scratches the controller.

There is a hole in the top designed for cable management, you can use a velcro tie or zip tie to get the cable out of the way.

This is used in speedruns preformed by somewes.

If you want one printed I am selling them at NES4.fun

Print one for yourself or a friend, and have fun playing your Retro games in comfort.

This is a remix of:

PS4 Decoy Controller by Vince_Prints
https://www.thingiverse.com/thing:3882003

Originally shared under the Creative Commons – Attribution license.
https://creativecommons.org/licenses/by/4.0/

Print the top and bottom halves you will have to glue them together.

I am using .16mm layer heights to make it a softer grip.

I print this with a brim to prevent warping on the bed.