Skip to content

Nerf Doublestrike Trigger mod

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This mod is for the Nerf DoubleStrike pistol. Please read all notes before printing, and share the print / notes if you make it! The pin holes might need to be drilled out slightly after printing, I did this to keep a smooth snug fit for the part.

After printing I found the following helps.
1. place trigger spring in trigger hole (smaller) and line it up with the bigger hole on the trigger.

2. Slide the trigger axle though the spring & big hole on the trigger shoe.
3. rotate the trigger so it is almost upsidown then rotate it counter clockwise and you lower the trigger and spring into the frame, this should allow for firm trigger spring. You will have to work the trigger down as you lower it onto the axle.
4. Have fun!

******READ THIS********
Be sure you take note of the small spring under the trigger when you take aprt the inside of the gun. If you can get a picture of it's correct position, as I guessed as to where it should lay.

  • 3D file format: STL
  • Publication date: 2019/08/22 at 15:06





Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!