Multi Color Kirby! [4 Colors]

I usually use my Kirby model as a first test print on most of my machines, so I figured as a good first test of the MMU, I should do Kirby!

So this Kirby is printed in 4 colors at once and is not painted at all. I'll list the filaments I used below to get the correct colors. And I did have some issues with the black bleeding into the pink. I landed on 80mm wide and 30mm deep per color. And that seemed to do the trick.

Watch the video here: https://youtu.be/AC3vXYKbCAc

I have plans for a few more things coming soon on this MMU. Let me know what you guys would like to see. :)

Printers: Prusa i3 MK2S with MMU
Filament:
Inland PLA "Pink"
Fillamentum PLA "Signal Red"
Fillamentum PLA "Traffic Black"
Fillamentum PLA "Traffic White"
Layer Height: 0.15mm
Supports: No
Modeled in Fusion 360