This is a remix of Modibot, originally designed by Kidmechano. Check out the Modibot webpage as well: https://www.modibot.com/
I had trouble printing the original pieces due to their orientation, so I removed the included supports and oriented the pieces horizontally. Alternative files are also available where each piece is split into two, allowing them to be printed with a flat side against the print bed. This should make printing the pieces in ABS even easier.
I also tried to scale the model to a 1:12 scale but something went horribly wrong and I ended up with an approximately 170mm model, for a 1:10.5 scale.
The ball ends of the joints needed a fair bit of work with sand paper before they fit into the sockets. Careful with the feet especially, the sockets there have thinner walls so they break rather easily.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!