Micro RC boat
- 5.6k views
- 31 likes
- 26 downloads
3D model description
Model designed for resin printers (190mm long, 1.5mm wall and 3mm shaft holes). At 200% magnification, FDM can also be printed (380mm long, shaft holes will still come out for 6mm shafts and wall will be 3mm after magnification). Recommended printer for Resin is Kelant s400s or equivalent, for FDM it is suitable to cut the model as needed. For a small model drive you only need one standard servo and one micro servo. The standard servo needs to be disassembled, the motor used for the drive and the servo controller adjusted so that instead of the potentiometer supply two resistors 2K2 (which makes the circuit ordinary ESC) The ship should be powered by 1S lipo battery.
3D printing settings
Resin- layer 0,05 - 0,1mm
FDM - Nozzle 0,4mm, layer 0,1 - 0,2mm
- 3D file format: STL
- Last update: 2020/04/06 at 10:57
- Publication date: 2020/04/04 at 16:01
Best sellers of the category Game
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!