This is a Tabletop figure which you can print at one time.
You have to glue it together, or you could use a resin printer to print the whole model as one part.
If you print all models seperately you can still print it at one time with a filament printer.
You can paint it as you wish and you can print a whole army. my printer has a bed-space of 300x300mm so i can print at least 6 whole figures at one time.
One figure weighs about 15 grams and takes ca. 2 hours to print (if you print it slowly to get a good looking result)
PS! : You don't need the object called "cooling-tower" I just print these pillars to get more cool-down time between the layers so it looks a bit better in the end. If you print more then one whole figure at a time, I think you shouldn't need it.
Whole model size: 70x50x45 mm
printed with a geetech A30
Designed in AutoCAD
Sliced in Cura(4.6)
My settings were:
Material: PLA 1.75mm
Nozzle size: 0.4 mm
Extruder temp: 202 °C
Bed temp: 70 °C
Layer height: 0.15 mm
Top/Bottom layers: 4
infill density: 60 %
I used a brim of 3mm to get a good adhesion.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!