This is a remix of http://www.thingiverse.com/thing:297623
I wanted a holder for my battery to stop it sliding side to side in the velcro straps but also wanted to keep the weight down.
I cut the original in half and joined it to itself to give two strap points and no top.
I fitted it to the base of my quad with cable ties.
works great for my Turnigy 2.2 2200mah 3 cell 11.1v battery's
battery size is 34mm wide by 107mm long and 25mm heigh but that does not matter as there is no top.
total size is 115mm x 41.4mm x 13mm.
The Tray weighs 14g and 18g with velcro straps
The Gopro mount in the pictures is here http://www.thingiverse.com/thing:602678
Hope you like it as its working well for me on my quad .
I printed mine in red ABS at 0.25 layer height and 30% fill.
I attached to the base of my sk450 with cable ties, you can see in the pictures that I drilled a hole in one side to get one of the ties in.
I mounted my battery slightly back from centre to allow for a gopro that will be mounted at the front.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!