It can be used as a tool for arm wrestling training. You exercise your fingers, wrist, biceps and back. It comes in two pieces easily mountable:
The two pieces have the same printing parameters.
The second piece it has to rotate 180º in the gcode program.
The dimensions of the two pieces are:
Height: 106 mm
The print parameters are:
Layer height (mm): 0.2
Shell thickness (mm): 1
Enable retraction: Yes
Bottom/Top thickness (mm): 0.8
Fill Density (%): 30
Print speed (mm/s): 30
Printing temperature (C): 200
Bed temperature (C): 0
Support type: None
Platform adhesion type: None
Diameter (mm): 1.75
Flow (%): 100
Nozzle size (mm): 0.5
The printing time of the first piece is about 13 hours and the weight arround 150 grams
The printing time of the second piece is about 7 hours and the weight arround 90 grams
Soy un ingeniero que se ha comprado una impresora 3D y se lo está pasando como un enano
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!