Skip to content

94 cm Tintin fuse

3D model description

Tintin's rocket in homage to its talented creator, Hergé.

Notice to the enthusiasts for the realization of this large size rocket. Me, I didn't have the courage to finish it because the printing times are very long and it takes a lot of PLA.

The version proposed here is 94 cm high and is based on the 40 cm model (whose photos you see) ->èle-3d/jeu/fusee-tintin-de-40-cm. This is the maximum size I can make with my printer without cutting the parts. Normally the parts have to fit together correctly, proof with my beginning of realization.


All the parts of the rocket fit together. A threaded rod with nuts will be necessary to block all the stages and a glue is advised between the feet and the ailerons. Inserting the ailerons into the nozzle is quite hard on the first centimeters because I didn't want to put too much play to avoid glue. To make the assembly easier, make sure that the grooves of the fins are smooth and oil them very lightly if necessary.

Necessary supplies:

  • One M10 threaded rod 50 cm long (to be measured when the time comes because of the theoretical length)

  • 2 nuts + 2 washers M10

  • Epoxy glue

PS: I advise you not to reduce or increase the size of the parts because of the assembly sets which will also vary. You can still do it but very slightly.


10/27/2019 - First version

27/03/2020 - Increase of the assembly clearance between nozzle and aileron (new aileron)

3D printing settings

PLA printing in 0.2 mm with 15% fill.

  • Print as oriented in the STL

  • Required support for the parts named Aileron, Stage 5B and Shoe

Special attention to the fin:

It is the most delicate piece to print as it tends to come off the tray due to its shape and size. Provide a border to increase the hanging surface and, of course, the surface of the support.

For each floor there is a red and a white room. For example, for example..:

  • Floor 1B means, 1st floor to be printed in white (B)

  • Floor 3R means, 3rd floor to be printed in red (R)

  • 3D file format: STL





Page translated by automatic translation. See the original version.

Best sellers of the category Game

Related contents

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!