This is the biggest scaled down version of the Buratinu.
Instead of a span of 1300 mm this version has a span of 1150 mm.
The special thing about this version is that all parts of the wing, i.e. W3 to W5 as well as the elevons are identical to the large version which are included here:
The wingend W6 is smaller. You must take it from the Buratinu Midi 1000
Or in case you can print larger, you can take the parts from here:
The Buratinu 1150 uses the same fuselage as the Buratinu Midi.
So you have to take it from here:
Also this version should not require any parts to be glued, except for the elevons.
But I didn’t tested it yet, so you will do it on your own risk!
Provided, of course, that the connectors fit tightly, in principle, all wing parts could be plugged with carbon tubes and tied together with strings, as has already been proven with
Red Swept Wing.
The big advantage of this is that you do not only need to replace individual parts if they are damaged. You can also use the parts to build the original Buratinu, but then the parts have to be glued!
airfoils: own design
wing span: 1150 mm
wing chord: 284/140 mm
CoG: 182 mm from rear edge of the fuselage
overall weight: 875 g
wing area: 24 dm²
wing loading: 36,5 g/dm²
motor: Propdrive 28-36 1000KV
propeller: Aeronaut CAM Aeronaut Carbon Classic 10 x 6"
battery: Turnigy 1300 mAh 3S
motor camber: -4°
perimeter_extrusion_width = 0.5
layer_height = 0.25
perimeters = 1
fill_density = 0%
bottom_solid_layers = 4
top_solid_layers = 4
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!