My son came home with a pencil sketch of a Ski Ball game and said "Dad, can we print this?" A few hours of messing around in Fusion360 and here we are!
Uses a 10mm ball bearing or similar sized marble. All the individual parts will fit on a standard 200x200 bed.
Prints with no supports unless you struggle with bridging.
For easiest printing, print the back with the rear face down and print the ramp on its side. The base prints with the bottom down as normal, and the board prints flat.
Depending on your tolerances it may fit together snugly or not, but you can either glue it together or just friction fit the parts for easy disassembly later.
No post-processing is necessary, but you can quiet it down a bit by coating the inside of the back and the ball return with GOOP. It is rubbery when dried and will quiet it down a bit when in use. You can also use it on the ramp, just keep it smooth!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!