Cyber Bunny from the first edition of King of Tokyo. Designed to replace the cardboard cutout that comes with the game. Some assembly required.
There are three options for printing:
SINGLE - The full model in a single file. This may be very tricky to print.
FULL (+COMMON) - The model sliced in to few pieces, easier to print, but must be assembled afterwards
FLAT (+COMMON) - These files are the easiest to print, as overhangs have been minimized, but there's a lot of assembly to do after printing.
If you print the FULL or the FLAT files, you'll need the COMMON files as well.
I printed my parts in ABS, and used ABS slurry to glue the parts together.
The fists are remixed from Tardis Transformer V2 by Ellindsey.
You can find the rest of the King of Tokyo monsters in this collection. There is also a blog post with more information about the models.
The parts do need to be glued together. If you printed the FLAT parts, start by gluing the two halves of each part together first. Here I used plenty of ABS slurry to make sure any gap between the halves gets filled. Any excess slurry can be cut or filed off once the its is set.
Test fit each part before applying glue; The parts may need minor filing or sanding to fit.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!