- 3.5k views
- 20 likes
- 17 downloads
3D model description
A rod passes through the box in 2 separate grooves, then by a sleight of hand, it is shifted by entering the bottom groove and exiting in the top groove.
All you will need is a 15 to 20 mm diameter rubber band in addition to the printed parts.
Make sure that all the parts slide freely in the case (especially the "trigger" which must fall freely). The trigger is held in place with a small piece of filament cut flush.
The V2 cover (with the windows) works with the intV2 ruler (the piece of filament does not pass through the room).
Practice before you present this magic trick!
If you like it, you can see my other magic tricks here.
3D printing settings
layer height 0.2 mm
wall thickness 0.8 to 1.2 mm
filling 25 to 30 %.
Holder only for ruler-int or ruler-intV2
- 3D file format: STL
- Last update: 2020/12/02 at 18:01
- Publication date: 2020/05/07 at 18:41
Page translated by automatic translation. See the original version.
Collection associated with this 3D model
Best sellers of the category Game
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!