its a body with holes to mount the springs to
its designed for an Axial AX10.
I designed it using 123d
printed with an Anycubic delta plus
0.8mm wall 20% infill 0.2mm layer.
print a 5mm brim around the roof and bonnet
use 8 M3 c/s screws to screw the roof and bonnet together
the battery pack is a 3 cell lipo
The things I use and have are...
Tinkercad, 123design, Fusion360
Anycubic delta plus
Most common print material PLA
Most common print speed 30-40mm/sec
Most common layer hight 0.2-0.3mm
Travel speed 150mm/sec
Nozzle size 0.4
First layer bed temp 60 degrees
All other layers 50 degrees
Hot end 180-200 degrees for PLA
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!