I've always wanted an articulated Gremlin and decided to try making one,
this is it.
I used this excellent model
and I used these joint connectors from
I replaced the neck connector with a pin (to save headaches)
and included alternate head and hands files (non articulated ears and fingers)
that should be be easier and faster to print at layer 0.2mm
Use supports when printing,
body parts only need light cleaning, as any small support leftover adds to the scaly look of the Gremlin,
joints need proper clean sanding to snap together
GREMLIN print time broken up:
temp 205 infill 30% layer height 0.2mm speed 45
body 2hr 28 min
arms 1hr 44 min
legs 1hr 28 min
waist and pins 1hr 43 min
GREMLIN with articulated ears print settings:
print time 4 hr 30 min
infill 50% layer height 0.1mm speed 40
GREMLIN articulated hands print settings:
print time 1 hr 48 min
infill 50% layer height 0.06mm speed 20
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!