ARTICULATED COBRA SNAKE FLEXI PET PRINT-IN-PLACE

This is Articulated cobra with 1 heads that requires No supports.

It is a Print-in-place design no assembly required

Please feel free to share images of your prints on this page, I would love to see 'em.
Thank you.

Check out ARTICULATED COBRA

Check out ARTICULATED FROST DRAGON

Check out GIANT ARTICULATED DRAGON WITH 3 HEADS

Print testing, Images and Videos are created by Made In Space

Make sure you have a good first layer or you can use a raft because it has a lot of small parts. Also, make sure your printer is well calibrated or you will end up with a lot of cleaning up. It is best to use a thick first layer (10 mm/s and 0.25 - 0.3 mm).

We used a 0.4mm nozzle
0.16 mm layer height
a raft
10 % infill
No supports
Printer Ender 3 v2
Print speed 50 mm/s