The latest 3DRC vehicle! It's a small, reasonably easy to print drift car with a realistic body.
All parts (except tyres) can be printed in PLA. I used rigid.ink flexi PLA for the tyres but any flexible filament can be used.
Printed in high quality rigid.ink filament - see their filament range and comparison here:
All wheel drive-makes drifting fun and easy
Simple, durable construction
Realistic body inspired by the Nissan 240sx
Drivetrain runs on ball bearings
M3 bolts and 3mm shaft (listed in assembly guide)
1304 outrunner motor (I used this one: https://hobbyking.com/en_us/3100kv.html but any with a similar kv should work)
10 amp brushless car esc
4.4g servo (https://hobbyking.com/en_us/turnigytm-tgy-1440a-analog-servo-v2-0-8kg-0-10sec-4-4g.html)
Small (350ish mAh) 2s LiPo battery - fits in rear bumper
2ch radio system (2.4ghz recommended)
I can print any part of this for a small fee - PM me if you need part of it printing and can't do it yourself.
Vote here on what to make next:
(or message me if you have any other interesting ideas)
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!