ZOHD Talon GT Rebel Interchangeable Nose System+ Pan Mod

Since the original nose was a dirt digger and didn't fit my GoPro Hero 10, I designed my own.

The System comes with a Frame to glue to the Foam.

The Tips are bolted and interchangeable.

In case of a crash, the can be replaced very easily.

There are 3 different noses included.

2 Full Tips without GoPro Mount.

1 Tip to Mount a Hero 9,10 or 11.

The System mounts with a hinge.

You will need the following parts:

5 Pcs M3x10mm screw,

9 Pcs M3 Heat set inserts,

1 Pc 20mm filament which is used as the hinge.

Warm the filament with a soldering iron to melt it in place.

There was an issue with the file naming of the full GoPro nose. <Should be fixed now by renaming.

ABS,ASA,PETG or CF nylon

5 Top, 5 Bottom Layers

3 Walls

10% Infill

0.4mm Nozzle