Wall Mounted Headphone Hanger

2-part headphone hanger designed to be mounted to the wall. Using 2 screws to mount the mounting block to the wall and then slide the main headphone hanger body onto the mounting block.

Visit my website to see more designs and work I have done. www.adylinn.com

STLs included: headphone hanger and mounting block (files have been repaired and saved in optimal orientation).

Files included: Print and Finishing Info (.txt and PDF) and License (PDF)

Recommended Print Settings:
Filament choice is not important (PLA, ABS, HIPS, PETG etc all options).
Use recommended temperature settings for filament chosen (~210 / 70 PLA, ~240 / 110 ABS).
Support recommended - mounting slot on hanger (~4g / 0.45m).
Adhesion - Brim or skirt
Speed - 50-80 mm/s or whatever you are comfortable with
Infill - 25%
Layer Height - 0.1 - 0.3mm

Orientation - hanger body: laying on back, mounting block: laying on back. Your slicer should already import in the optimal orientation.
Print time - dependent on slicer settings but I estimate on average 3 hours 10 minutes.
Material usage - 42g / 5.36m primary build, 4g / 0.45m support.