Skip to content

TX02 95mm Racing Frame (1103 motors) F.Version

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 613 views
  • 4 downloads

3D model description

Whats new in final version : * Holes for battery strap

4 pillars for better camera mount durability
In build arm reinforcement
Easy to install Flight controller - more space for outlets, battery connector, micro usb

95-100mm Frame
Weihgt : under 16g (Printed with 60% infill)
Using 1103/1104 motors
20x20mm flight controllers : 4mm holes for screws
FPV Camera - TX02/RX01 + hole for buzzer's pins behind camera mount

BE CAREFUL when you sliding camera to holder, if you do that with a lot of pressure you can break some electronic part in back of your TX01/02. My TX02 don't working after sliding in, I must solder 0.15mm condenser back in to place, but almost impossible to do !
Glue everything together with second glue (if wits well it's not necessary)
For glue reinforcement well use tape and some weight to push it down. (as on last picture)

TIP : After reinforcement get printed, keep printer's hotbed cool down, if you will try to peel it off when it's hot, it can bend and it won't fit well on frame.

I used : KingKong 1103 motors
20x20mm FC with 10A ESC's
Gemfan 2035
Eachine TX02

If you print one, let me know PLS ! :)

On the finish i just want to say that frame made of pla i very fragile, use abs or buy 10x stronger carbon fiber

3D printer file information

  • 3D design format: STL Folder details Close
    • Frame_final.stl
    • antenna_shield.stl
    • cam_holder_final.stl
    • camera_mount.stl
    • everything.stl
    • frame_V2.stl
    • pads_for_final_frame.stl
    • reinforcement.stl

    Learn more about the formats

  • Publication date: 2018/07/19 at 17:17

License

CC BY

Creator

Designer
Czechia
Kossel Plus

Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!