Skip to content

Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*

ezgif.com-gif-maker.gif STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
PXL_20220818_173428118.jpg STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
orintminion STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
PXL_20220809_190534667.jpg STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
HyperPixel-4in-Round-Touch-m3-01-04-crooked-v47-top.stl STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
HyperPixel-4in-Round-Touch-m3-screen-dummy-v40.stl STL file Sphere Enclosure w. crooked legs (M3O104) for pimoroni HyperPixel 2.1 round Touch and *Raspberry Pi*・3D printable design to download
Share
Add to
Make
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

Designer

printminion

printminion

3D model description

Support me: Buy Me A Coffee

Enclosure for pimoroni HyperPixel 2.1 Round Touch * (480x480 pixels (~229 PPI) ) and raspberry pi zero.

collection of cases for this screen

Check out videos
* demo full-screen gif
* Disassembly
* Assembly
* EPIC Satellite Photo Frame by MattGrayYES

If you don't trust your printer order print on shapeways coming soon

Printed with Prusa MK3S

Important: don't tighten the screws all the way otherwise screen module may peel off from PCB

WARNING: WHEN INSTALLING HYPERPIXEL 4.0 ROUND ONTO YOUR PI MAKE SURE NOT TO PRESS DOWN ON THE SCREEN SURFACE! HOLD THE BOARD BY ITS EDGES AND WIGGLE IT TO MATE WITH THE EXTENDED HEADER (OR GPIO HEADER). ALSO TAKE CARE NOT TO PULL ON THE EDGES OF THE GLASS DISPLAY WHEN REMOVING YOUR HYPERPIXEL.

3D printing settings

Print is tested with 0.3 layer height on Prusa MK3S with Prusament PLA.

It is important that your printer can print with 0.3 mm clearances.

Here is a video about clearances (make test print of) https://www.youtube.com/watch?v=XnJBpCWf9Mc

Check also measurement your printer produces (test your printer with XYZ Calibration Cube) https://www.youtube.com/watch?v=SN9NCn-Dhf8

3D printer file information

  • Design number: 809353
  • 3D design format: 3MF and STL Folder details Close
    • HyperPixel-4in-Round-Touch-m3-01-04-crooked-v47-top.3mf
    • HyperPixel-4in-Round-Touch-m3-01-04-crooked-v47-top.stl
    • HyperPixel-4in-Round-Touch-m3-screen-dummy-v40.stl

    Learn more about the formats

  • Publication date: 2022-08-10 at 17:30

License

CULTS - Private Use

Tags

Issue with this design? Report a problem.

Other designs from the “Various cases for HyperPixel 2.1 round Touch display by pimoroni ” collection created by printminion

All

Other 3D models from the same designer printminion

All

Best 3D printer files of the Gadget category

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!