Skip to content

Artillery Sidewinder X1 Z-axis stabilizer bar supports

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Supports for Z-axis stabilizer bars of the Sidewinder X1 3D artillery printer

Functional and attractive looking, they are designed for 12 mm diameter aluminium tube, length 580 mm.

Assembly instructions:

  • The parts are held in place with the printer's own screws, three screws for each part of the base and two screws for the upper part.

  • Once the bars have been cut to 580 mm length, the edges at both ends must be sanded to facilitate insertion.

  • The bars enter approximately 17 mm into the holes. For reasons of printing accuracy or tolerance of the bars used it may be necessary in some cases to sand or scrape the inside of the holes so that the bars enter smoothly.

  • The bars can be drilled and screwed in with threaded bolts to improve the hold.

3D printing settings

These values can be varied at your discretion:

PLA material

Layer thickness 0.2.

Filling 20%.

Base parts do not need to be supported.

Upper part needs support in the base holes.

  • 3D file format: STL





Page translated by automatic translation. See the original version.

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!