Sony RX100M2 Lens Cap
- 772 views
- 1 like
- 13 downloads
3D model description
A lens cap for the Sony RX100M2 and possibly the RX100 (not tested).
It is designed to be used with an adhesive gasket (cross section of max. 13x5 mm). Cut it into a piece with a length of approximately 212 mm.
UPDATE1: There will be a re-design for a 13x5 mm gasket
UPDATE2: Made it more simple, added an indentation to fix the gasket in place while putting it on the camera
UPDATE3: Didn't pay attention to the golden rule: "No indentations"! Pretty hard to remove the support behind it, will add a v3-1 without one. If you have a high quality gasket with good adhesive you want to use this one.
- 3D file format: STL
- Publication date: 2019/04/26 at 17:21
Collection associated with this 3D model
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!