Sony e-mount body cap (and desiccant compartment)
- 4.8k views
- 1 like
- 32 downloads
3D model description
Sony e-mount body cap.
Initially designed for a laser sintered print, this does print well on FDM printers too (see print setting notes).
v2: just the e-mount body cap.
v1.3: has a compartment and lid to put a small desiccant pouch (as found in lens boxes) to keep the camera sensor moisture free.
3D printing settings
FDM: May look best printed face up, with support, however if your print bed leaves a reasonable finish, printing face down (as in the photo) uses less material and is likely to print a better E-mount.
PLA: 20% infill or more recomended. Layer height .2mm or less
(Cura: 90min, 6.42m/19gms, .2mm layer @ 60mm/sec. face down is much quicker )
3D printer file information
3D design format: STL Folder details Close
- Sony_NEX_mount (1mm dessicant door) v1.stl
- Sony_NEX_mount (body) (v1.2).stl
- Sony_NEX_mount (body-cap) (v1.3).stl
- Last update: 2021/07/07 at 20:35
- Publication date: 2017/10/23 at 03:08
DP/Lighting cameraman, working in drama and models VFX. Background in electronic and mechanical design, including photographic adapters and accessories.
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!