Silicone Pad Mould
- 476 views
- 2 likes
- 7 downloads
3D model description
This is a mould to make silicone pads that can be stuck onto the underside of objects to prevent them from sliding around on surfaces.
Put a thin layer of petroleum jelly (aka Vaseline) on the surfaces that come into contact with the silicone. Dispense DIY silicone sealant into the mould and smooth flat with a filling knife/spatula (a print bed scraper works very well). Leave overnight to set, then seperate the two halves of the mould to remove the silicone pads.
Clean the pads with isopropyl alcohol and stick in position with a blob of the same silicone sealant.
3D printing settings
Printer: Ender 3
Nozzle Temp: 205° (210° on the first layer)
Bed Temp: 55°
Top/Bottom Layers: 4/3
- 3D file format: STL
- Last update: 2020/06/27 at 18:04
- Publication date: 2020/06/15 at 18:53
Friends know me as Mox, I live in the UK and have been on the planet for over half a century.
Tinkering with plastic creations is one of my pastimes, along with photography and enjoying the great outdoors.
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!