Sometimes you just need a light in the dark.
Now you can print your own lantern. And if you add some parts it even shines!
The lantern model is quite large. To print it you have to resize it. I printed the lantern at 30% and the result is still ok.
Print the glass part with transparent PLA or PETG if you want to make it shine.
For the light you need
1x LED 5mm
1x matching resistor for the LED
1x 1.5F, 5.5V goldcap capacitor
1x USB micro B port
Solder the USB port, the capacitor and the LED (and your resistor) in parallel. Now you can charge your lamp with power from your USB port. A 10 seconds charge will make the LED shine for at least 10 minutes.
(Build at your own risk)
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!