Skip to content

Shapeoko 2 Raspberry Pi B+ Workstation

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 903 views
  • 1 like
  • 11 downloads

3D model description

In an effort to make my Shapeoko 2 safe and reliable, I've created this workstation. TGFX and CoolTerm didn't work reliably for me with the TinyG controller so I decided to create a workstation with software that works every time without sudden disconnections or very unfriendly interface. I also made use of an old computer Monitor that I had in the closet that makes a very good screen.

I used the very good designs of these two people in the construction of this work station:

http://www.thingiverse.com/thing:396858

And a modified version of this part to install the NEMA 23 motor to the Z axis. To only change I made was to remove the posts. They were too short for my application. and added 3 spacers on the other side of the bracket to eliminate those awful little washers that Inventables have you using for installation of the Z Axis Motor. They are very hard to manage.

http://www.thingiverse.com/thing:269745

The GUID based program I wrote for the Raspberry Pi was done in Gambas3. I also wrote a text version that can be run from the command prompt is just a big shell script. Both programs feature jogging via the keyboard. The GUI version allows for 1mm jogging increments also. All the instructions and files are located in the link below. Feel free to improve on it. I know someone can make this really awesome, like provide feedback window of the machines positioning..... You may find the commands I use to control the TinyG are odd, but this was the only way to make it work flawlessly every time. I am very satisfied with my workstation's performance. I've created the circuit board posted here using this setup. The Synthetos documentation didn't always work on my TinyG. To save time I just worked around any issues.

http://www.shaputer.com/tinyg

  • 3D file format: STL
  • Publication date: 2019/04/25 at 17:30

Tags

Creator

License

CC BY


Best sellers of the category Gadget


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!