Skip to content

scania logo

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 2.9k views
  • 3 likes
  • 3 downloads

3D model description

not the the most easy print to do so read the instructions well.

only the scania v8 part is printed with support.

first print the scania file. then the scania v8 file.

this was the easy part of the print.

now comes the tricky part.

load the scania bird black and grey right part 1 in the slicer. for the black part you have to print from 0 and let the print stop at 1,8 mm. For the grey part you have to print from 1,8 mm til the end.

then load the scania bird red and yellow right part 2 in the slicer. the red part starts at 4,2 mm the same is for the yellow part.

now you have 4 g codes and you can start printing.
strat with the black part then the grey then red and at last yellow.

When you start printing do not remove the print from the bed. If you print with a heated bed make sure your temp stays at the right temp while you are changing the filament color.

Do the same for the scania left files.

Now you can put it together. I used a 3D pen to welt it all together but you can also use glue or something else.

good luck printing

3D printer file information

  • 3D design format: STL Folder details Close
    • scania bird left part 1 black and grey by ctrl design.stl
    • scania bird left part 2 red and yellow by ctrl design.stl
    • scania bird right part 1 black and grey by ctrl design.stl
    • scania bird right part 2 red and yellow by ctrl design.stl
    • scania by ctrl design.stl
    • scania v8 by ctrl design.stl

    Learn more about the formats

  • Publication date: 2018/06/05 at 13:46

Copyright

©

Tags

Creator

Designs 82
Downloads 17.8k
Sales US$548
Followers 165

Love to design easy and more complex files for fdm 3d printing.

Printing with a Opiliones delta printer, Ender, creality cr10 300 and cr10 400

Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!