RV Trailer Window Crank Steampunk
- 1.7k views
- 2 likes
- 5 downloads
3D model description
This is a collection of cranks for an RV / Trailer window mechanism with a 5/16 or 8mm spline shaft. The variations relate to the length of the stem at the back as some are embedded in windows a bit more than others. Two of the versions don’t require the knob. Printed mine in ABS then covered with copper and aluminum powder mixed with acetone. I am sure they will work well painted or left plain.
The knob needs a 3/32 x 3/8 or 3mm x 10mm bolt. There is a spot for the nut as well if you want to pause the print and drop one in but I discovered the bolts thread in nice and strong without.
3D printing settings
Prints best at resolutions at .3 mm or under lest the splines get a bit fuzzy.
3D printer file information
3D design format: STL Folder details Close
- Crank knob.stl
- SP Crank 2D 1.stl
- SP Crank 3C1.stl
- SP Crank 3D .75.stl
- SP Crank 3D 1.375.stl
- SP Crank 3D 1.stl
- SP Crank 3E .75.stl
- SP Crank 3E 1 .stl
- SP Crank 3F 1 .stl
- Publication date: 2017-03-27 at 02:36
Best sellers of the category Gadget
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!