This model has 1/10 scale and based on 1/18 chassis from Wltoys buggy. I have used Wltoys K929B, but there is possible to use WLtoys A959B
or cheaper Wltoys A959
also I have MZ GS1004 buggy
which very similar with Wltoys.
Original chassis cutted in the middle and extended by 8 cm, need to drill some 3 mm holes and insert screws M3. Also need to cut central driveshaft, I fixed extend shaft by superglue and it works fine.
Shock's mounts was changed to horizontal bar for increasing ground clearance. Because the new body has more weight, I have added preload spacers on front shocks.
Body mounted on the chassis by improvised soldered frame from copper wire.
Printed it from ABS with 0.2 mm layer and 0.4 nozzle, infill 10-15%, walls - 1.2 mm. Glued together by ABS juice (acetone+ABS) and painted after polishing by sand paper
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!