Skip to content


Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description


Mask divided into 10 parts to be printed on most printers - to be glued / assembled by yourself after printing.

Before gluing the parts I recommend wiping the glued surfaces with sandpaper - I used super glue gel for gluing.

You can drill the parts and add toothpick reinforcements.

To connect the upper and lower jaw I recommend using rubber bands.

For rear hook and lower jaw I recommend flat knitted elastic for clothing available at haberdasheries. (width 1 cm)

I do not agree to series sale of the mask on any sites - if you want to sell printed mask please contact me.


Maska podzielona na na 10 części aby można ją wydrukować na większości drukarek - do samodzielnego sklejenia / złożenia po wydrukowaniu.

Przed sklejeniem części polecam przetrzeć papierem ściernym klejone powierzchnie - ja używałem super glue w żelu do klejenia.

Można nawiercić części i dodać wzmacniane elementy z wykałaczek.

Do łączenia górnej i dolnej szczęki polecam użyć gumek recepturek.

Do tylnego zaczepu oraz dolnej szczeki polecam gumę dzianą płaską odzieżową do zakupu w pasmanteriach. (szerokość 1 cm)

Nie wyrażam zgody na seryjną sprzedaż maski na jakichkolwiek serwisach - jeśli chcesz sprzedawać wydrukowaną maskę proszę o kontakt.

3D printing settings

No special requirements - print with supports.

3D printer file information

  • 3D design format: STL Folder details Close
    • down_left_1.stl
    • down_left_2.stl
    • down_right_1.stl
    • down_right_2.stl
    • teeth._down.stl
    • teeth._up.stl
    • up_left_1.stl
    • up_left_2.stl
    • up_right_1.stl
    • up_right_2.stl

    Learn more about the formats

  • Publication date: 2022-06-20 at 12:29





Designs 12
Downloads 264
Sales US$194.80
Followers 16

My designs are protected by copyrights laws. It is not authorized to distribute or sell any of my designs without prior written authorization from myself. Even if you modified my original design.
Thank you

Issue with this design? Report a problem

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!