Print in place Foldable mini House with wiggling Fir!

NOTE: PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:

https://www.patreon.com/PA1_MAKER

TEST YOUR PRINTER while creating something fun for the kids, to make your own mini christmas village, or a miniature scene!! :p

UPDATE: House v02 (to accommodate christmas accessories!!!) and two doors added. One front door, and one rear door with 8mm light socket.

Foldable little house with basement and a cute little wiggling fir to test your 3d printer.

House have a tolerance of 0.3mm on each gap to test your extrusion settings, while the fir will test the ability of your printer to create "snap in place" parts.

NO SUPPORTS REQUIRED.
Can be scale up for bigger houses.
Can fit a LED tea light (DONT PUT A CANDLE INSIDE!!) or accomodate christmas lighting through the rear door. So you can make a nice christmas village if you want.

Can also be used as a gift box, because it can be close or open as many time as you want.

Layer height pictured: 0.2. But you can use other layer height.
Temp: 205. Not to hot, you want the bridges and overhangs to build correctly.

Overextrusion: Pieces won't move or won't snap together at all, because too big for the receiving part (which is gonna be to small too!)

Underextrusion: Pieces won't snap together as they're gonna be too loose.