Pozyx UWB | Tag Casing & Anchor Pedestal

This thing consists of everything needed to setup a Pozyx UWB testbed without any great effort. A tag is supposed not to be used in conjunction with an Arduino, but most likely connected to a computer via serial port.

The casing for tags provides protection while doing localization experiments. Anchors are assumed to be fixed most of the time, therefore the - somewhat geometric - frame is kept together with cable ties making it highly convertible for different places of installation.

For one casing you need:
- 2x tag-side
- 2x tag-conn
- 2x tag-pin
- 4x 2.5 mm screws

For one frame placing an anchor upright - as shown in the image - you need:
- 1x anchor-O
- 2x anchor-T
- 2x anchor-X
- 6x cable ties