Here you can find my version of the poppy's noxian hammer, you need to print the stick and two times the half head. If it does not fit together well, file the end of the stick.
Do not hesitate to contact me by mail if you've got a problem with this model, or if you need a maker for a project, or for any reason :
Finally, if you've liked this model, don't forget to drop a "like" and / or subscribe.
Have a good day
Here is my version of the poppy noxian hammer, you will have to print the handle and 2 times the "half head". If they do not fit well, file the end of the handle.
Feel free to contact me by email if you have a problem with this model, or if you need a maker for a project, or for any other reason :
Finally, if you like this model, don't forget to drop a "like" and/or subscribe.
Have a nice day
Quality: better as possible
Support for the stick but not for the half-head.
I recommend to print both half-head in the same time.
It's gonna take you about 3 hours to print it.
Print it with the best quality possible, a support for the handle, but not for the "half heads". For a better time optimization, I recommend to print both "half-heads" at the same time.
Printing takes about 3 hours.
I'm 17, I post models as much as possible. My 3d models are build with SolidWorks 2017. If you have any request/suggestion, if you need a maker for any project, contact me by sending me a mail : firstname.lastname@example.org
Hope you guys likes my models,
Have a good day
Page translated by automatic translation. Suggest a better translation