- 712 views
- 0 likes
- 1 download
3D model description
This phone clamp is designed like a vice and can grip the phone very tight. It works great on top of a tripod and in the car. The clamp can be left loose so the phone slides in easily from the top or tightened to grip the phone firmly. Designed to grip phones as small as the original iPhone SE (58.6mm wide) and expands to 90mm wide able to hold very large phones. This will fit your phone.
Measure the thickness of the thickest phone you plan to use and print the size bigger. This download includes STLs for phone thicknesses 8mm to 20mm.
Example. Phone is measured to be 13mm thick.
Print the following parts
3D printing settings
Print the PhoneClamp with no support.
Print the PhoneClampArm in the upright position (same as the STL position) with support everywhere and the support angle at 45 degrees. This will provide the best strength when clamping because the layer lines extend to the contact area.
- 3D file format: STL
- Last update: 2021/04/09 at 19:48
- Publication date: 2020/08/27 at 14:57
All 3D Grip Gears models are designed for 3D printing with no support needed. Squeezing the gears together with a bolt locks parts in place. All of the parts regardless of the number of teeth fit each other. These parts have been thoroughly test printed with PLA and PETG for fit and function. Anything constructed can be taken apart again.
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!