Skip to content

Owl - Wall Key Holder

?
Creation's quality: 4.6/5 (13 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 27.8k views
  • 272 likes
  • 734 downloads

3D model description

Hello everyone,

🦉There's an owl!🦉

And she's amazing!🤗

Why?🤔

Because this owl is guarding your keys!🗝️

He probably won't kick a potential key thief in the finger, and quite likely the key thief would steal an owl as well. But .... look at her! Those eyes of hers!

Ok, that might be enough. I admit that this project was sometimes too much for me. But it was and is a pleasure to work on it! In the coming days, I will be adding more upgrades for the owl here. Therefore, do not forget to subscribe so that you do not miss any updates. 🙂

In .rar file is manual with pictures and with english and czech interpretation. 😉

⚠️⚠️⚠️⚠️⚠️⚠️⚠️
If you want diferent eyes types, you can visit this link on Cults3D and download them for free... :)
Link here: https://cults3d.com/en/3d-model/gadget/owl-wall-key-holder-eyes-1-0

When you print this model, don't forget to show it off! Nice to see them.

Have a nice day

Sparki 🙂

3D printing settings

Layer height: 0.12
Infill: 20%

  • 3D file format: RAR and ZIP

Tags

Creator

Copyright

©


Makes created by the community

Best sellers of the category Gadget


Add a comment

25 comments

Hello!
Does it really work well to print the main body upright without support?
Feels like the inner top part (red part here: https://i.imgur.com/f3BWttX.png) would end up bad since it's so steep.
If I can print it without supports that's great, but I just want to make sure before I waste any filament.
Thanks!

! C:\Users\RfC SSD\Downloads\owl-wall-key-holder20201004-7858-xl94n2.zip: Final inesperado del archivo
! C:\Users\RfC SSD\Downloads\owl-wall-key-holder20201004-7858-xl94n2.zip: La cabecera del fichero "???" está dañada
! C:\Users\RfC SSD\Downloads\owl-wall-key-holder20201004-7858-xl94n2.zip: No hay ficheros reparados

Lo he descargado y el archivo está vacío según me dice winrar...por favor podrían ayudarme

The archive only contains the eyes? What am I doing wrong here? I'm using 7-zip.
I also downloaded the free eyes package. It has exactly the same name as the "full" package.

7Zip does not like the Rar archives, recommend using WinRAR to unzip the files.

Hello there, I use Cura slicer and there works great. Which perimetr you use?

Hey Blamm, yes i have.

Quicky, do you have your line width on 0.4mm? That works fine for me

hi, I bought the owl but the black part (the back of the eyes) has the part where the knot is made, too delicate, even when 100% infill is broken it immediately breaks.

BLAMM - Hello, if you wont, you can add a supports. But Me and other people printed this object with out supports.

Great looking owl, bought it immediately! Would you recommend using supports for the eyes? That's the only place I can see going wrong when printing upright

Thanks for the answer! I'll buy from you :)

RAFAELCM27 - hello, this model is just for private use. But if you want sell 3D printed model to few friends, I don't have problem with this. Have nice day. 😉

ZOPARESS - Hi, this bug is in configuration on your slicer.

Is the printed owl (not the file) allowed for selling? Or just for private use?

Amigo necesito ayuda para armar el búho. No se cómo o dónde va el contrapeso. Ayuda porfa

LUKYSY - hi, that little bug was removed. Thank you for your feedback. 🙂

NERISSACHEUNG

Q: is it possible to have like a back plate for the owl mount on wall for those that will use 3m tape?

A: Hi, I don't think tape is a good idea. 🙂 It is always better to hang an owl on a nail. with a load, the owl can peel off and break. have a nice day! 🙂

CAPUCINE

Q:Hi, I bought and downloaded the Owl stl key holder, I would like to make a set of them with different eyes expression. Do I have to buy the others or can you just send me the stl for the eyes option only?
Thanking you
Regards
Marie France :)

A: Hi, I'm answering your question. 🙂 Here you can download different eyes: https://cults3d.com/en/3d-model/gadget/owl-wall-key-holder-eyes-1-0

STEVENBROUWERS

Q: hi there, I am struggling how to build the owl! you need some kind of rope I guess? do you have maybe a build video? thanks for your help

A:Hi Steven,
yes you need sewing thread and iron weights. I used a nut. There is a detailed instruction in the .rar file. 😉

NELSONRB - Yes. They are in .rar file. Manual is with pictures and with english interpretation. 😉

que requiere para su funcionamiento? hay instrucciones de armado?


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!