- 416 views
- 1 like
- 25 downloads
3D model description
It is used to carry the cables along the wall or elsewhere, although it is not necessary to screw it in, it can be left hanging. The small piece is not symmetrical, depending on which side you put the cable more or less tight. Place the small piece on the rail as low as possible depending on the cable we put, so that the cable is tight. It admits up to 6 mm diameter cable. The screw to hold the piece must have a conical head and a maximum of 6 mm.
The tightness of the cable means that they are neat and slightly taut.
3D printing settings
Filament : PLA
Nozzle : 0.4 mm
Layer height : 0.2 mm
Z-stitching : Rear
Filling : 50% Trihexagonal
Support : Do not use
Style mode : All
- 3D file format: STL
- Publication date: 2021/01/06 at 17:53
Page translated by automatic translation. See the original version.
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!