NESE, THE NO SOLDER 18650 MAKITA KIT
- 991 views
- 3 likes
- 29 downloads
3D model description
These are no solder, no spotweld modules for 18650 li-ion cells meant for high power discharge. Over 33Amps per cell capable.
For the hardware, go to www.18650.lt or www.1865o.com. Uses proprietary electrical bus bars and tabs.
These modules are designed as a component of Makita 18V battery replacement package. For now its made for V1 Makita batteries with simple circuit board and NOT BMS. V2 battery components will be added in near future.
With this set you will have to reuse top Makita battery cover, latch, spring and screws. PCB could be obtained on eBay or Aliexpress.
3D printing settings
First layer - 0.25, rest - 0.2
Perimeters - enough to make sides solid
Detect thin walls - checked
Solid top layers - 6
Solid bottom layers - enough to make bottom solid
Seam - Aligned
Modules should be printed with PETG, ABS or PC.
You might need to scale 3D print if you print with ABS or PC. Measure the print in all axis and do linear proportion for scaling up in X and/or Y and/or Z axis.
- 3D file format: STL
- Last update: 2020/07/26 at 21:39
- Publication date: 2020/07/24 at 09:26
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!