Stirling engine (Temperature difference based engine)

This is a Stirling engine design, it is an engine capable of working (making a circular motion) by making use of the temperature difference between the bottom and the top.

Test your printer and print material! If it has a good print and the material is rigid enough and able to transmit the heat of the steam, then you will have a functional motor made purely of plastic at your fingertips, if not, you will still have a nice mechanism for your desk (and even more if a small electric motor is installed).

Français

It is a concept of a Stirling moteur, a moteur capable of functioning (in a circulatory movement) by using the difference in temperature between the base and the top.

Testez votre imprimante et vos supports!

If it gives a good impression and that the material is sufficiently rigid and capable of transmitting the heat of the engine, you are ready to carry a fully functional engine in plastic, but you are also ready to use a very good mechanism for your office (and even more so if a small electric engine is installed).

Español

This is a design of a Stirling motor, it is a motor capable of working (making a circular motion) making use of the temperature difference between the bottom and top.

Test your printer and media!

If it has a good impression and also the material is sufficiently rigid and capable of transmitting the heat of the steam, then you will have at your fingertips a functional motor made purely of plastic, if not, you will still have a nice mechanism for your desk ( and even more if a small electric motor is installed).

To better understand the operation of this engine:

To better understand the function of this engine:

To better understand the operation of this engine:

https://www.youtube.com/watch?v=Som7eHM3-O0&t=110s

If the whole mechanism is put in a box:

Si l'ensemble du mécanisme est mis dans une boîte:

If the whole mechanism puts itself in a box:

170mm x 130mm