V6 Print in place engine

The model to download is a 6 cylinder V engine to be printed in one go!

**

The advantage of a "print in place" model is that there is only one file to print. This one requires no assembly or screws.

**

Other engine models are also available on my Cults page:

V12 Print in place engine: https://cults3d.com/en/3d-model/gadget/moteur-v12-print-in-lplace

V8 Engine Pint in place: https://cults3d.com/en/3d-model/gadget/moteur-v8-print-in-place

V12 engine block: https://cults3d.com/fr/modèle-3d/gadget/boc-moteur-v12

V10 engine block: https://cults3d.com/fr/modèle-3d/gadget/bloc-moteur-v10

V8 engine block: https://cults3d.com/fr/modèle-3d/divers/moteur-v8

V6 engine block: https://cults3d.com/en/3d-model/gadget/bloc-moteur-v6-go_3design

V8 engine block: https://cults3d.com/fr/modèle-3d/gadget/moteur-v8-gondesign-2

**

Feel free to put a Like/Like if you like my creation ; )

Make sure that the first layer adheres properly to the tray.

**

Concerning the printing precision, you can take the one that suits you best. For my part, I chose a precision of 0.2mm.

**

File to be printed with supports. In order to avoid having supports added everywhere I invite you to select the option "In contact with the tray" in "Support" as shown in the Cura screenshot. If you are using a different slicing software, I invite you to find the equivalent setting.

**

Also, still in Cura and "supports", I advise you to activate the 3 parameters (shown on the last image) to facilitate the removal of the supports once the printing is finished.