I was never really happy with my first jet boat design so I immediately started working on another. After a lot of testing and playing around I'm finally happy with Version 2 and I'm excited to see it in people's hands. I have a list of the other components you will need to get it running below. I hope you have as much fun with this boat as I have!
Motor : https://hobbyking.com/en_us/turnigy-xk2435-4900kv-brushless-inrunner.html
Or if you want to add your own watercooling : https://www.amazon.com/gp/product/B077YGP1BJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 + your watercooling block
4x M2.5 screws for motor mount
2x M2.5 screws for steering nozle
4x M2 screws for Output Nozzle
2x M1.2 screws for Trust Adjuster
1x M2 screw and small spring for Thrust Adjuster
4.5mm brass tube for shaft sleeve
3.5mm rod for output shaft (Threaded if you don’t want to tap the end for the nuts)
Lock nuts for impeller
1/16" OD rubber cord for gasket (I got it from McMaster)
2-3s Lipo max dimensions : 3"L x 1.375"W x 0.66"T
Main Hull and Lid: 0.2mm layer height
Nozzle parts and impeller: 0.1-0.15mm layer height
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!