Skip to content

MicroQuad

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 1.4k views
  • 3 likes
  • 21 downloads

3D model description

Printed in PLA

0.4 nozzle

0.3 mm layer

20% fill

https://www.youtube.com/watch?v=DGYJXRG42Lw

https://www.youtube.com/watch?v=l5JAopMZeOY

https://youtu.be/IY7zRl21cVY

The integrated prop guards is a bit wobbly (Micro105Quad_yk_base + Shields.stl) ... As can be seen here:

https://youtu.be/jWIckDByQkE

Also, the frame might lose its grip on the motors eventually (https://youtu.be/OqHjYu84a3A)

The parts I used:

Controller:

FLF3_EVO_BRUSHED Flight Controller Built-in Flysky 6CH PPM Receiver For Eachine QX95 QX90 QX90C

https://www.aliexpress.com/item/New-Arrival-FLF3-EVO-BRUSHED-Flight-Controller-Built-in-Flysky-6CH-PPM-Receiver-For-Eachine-QX95/32771488681.html?spm= a2g0s.9042311.0.0.WYkRiQ

FPV cam (works with my old Fatshark 1 goggles):

Eachine TX03 NTSC Super Mini 0 / 25mW / 50mW / 200mW Switchable AIO 5.8G 72CH VTX 600TVL 1/3 Cmos FPV Camera

https://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?rmmds=myorder&cur_warehouse= CN

TX (you do not need the receiver):

FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6B Receiver

https://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Transmitter-With-FS-iA6B-Receiver-p-983537.html?rmmds=myorder&cur_warehouse=CN

Props (you might want to buy some spares):

Original 5 Sets Walkera QR Ladybird Blades Propellers QX90 For QX80 Hubsan X4 JJRC H6C 1000A DIY Micro Quadcopter Frame 20PCS

https://www.aliexpress.com/item/Original-5-Sets-Walkera-QR-Ladybird-Blades-Propellers-For-QX90-QX80-Hubsan-X4-JJRC-H6C-1000A/32831272595.html?spm= a2g0s.9042311.0.0.B3AChI

Battery (~ 3 min flight for each one):

JJRC H31 H37 5Pcs 3.7V 500mAh 25C Battery With USB Charger For Hubsan H107 H107L H107D JXD385 / UDI U816

https://www.aliexpress.com/item/5-Pcs-3-7V-500mAh-25C-Battery-With-USB-Charger-For-Hubsan-H107-H107L-H107D-JXD385/32795365271.html?spm= a2g0s.9042311.0.0.B3AChI

Motors:

HOBBYMATE High Performance Brushed Coreless Motors 8520 8.5x20mm for Hubsan X4 H107C H107D, DIY Micro FPV RC Quadcopter Frame

https://www.aliexpress.com/item/HOBBYMATE-High-Performance-Brushed-Coreless-Motors-8520-8-5x20mm-for-Hubsan-X4-H107C-H107D-DIY-Micro/32803032268.html?spm= a2g0s.9042311.0.0.B3AChI

And dont forget - JST SH 1mm 2 pin - 4 pieces to connect the motors to the controller board - no workaround here !:

https://www.aliexpress.com/item/Hot-Sale-Factory-Direct-5-SETS-Mini-Micro-SH-1-0-2-Pin-JST-Connector-with/32698834901.html?spm= 2114.search0104.3.23.69ae389d7usyiz & ws_ab_test = searchweb0_0, searchweb201602_1_10152_10151_10065_10068_10344_10342_10343_10340_10341_10696_10084_10083_10618_10307_5711211_10313_10059_10534_100031_10103_10624_10623_10622_10621_10620, searchweb201603_6, ppcSwitch_5 & algo_expid = c3219b5d-8f16-49d8-b34a-6e2bba4b4a13-3 & algo_pvid = c3219b5d-8f16-49d8-b34a-6e2bba4b4a13 & transAbTest ae803_5 = & = 0 priceBeautifyAB

View https://blog.dronetrest.com/setting-up-flight-modes-in-cleanflight-betaflight/ and attached pics of the CLEANFLIGHT settings needed for the controller.

Add cleanflight app to chrome here:

https://chrome.google.com/webstore/detail/cleanflight-configurator/enacoimjcgeinfnnnpajinjgmkahmfgb?hl=de

You will need to calibrate and trim - explained here: https://www.youtube.com/watch?v=otJNzZrE-yk

3D printer file information

  • 3D design format: STL Folder details Close
    • Micro105Quad_yk_CamMount.stl
    • Micro105Quad_yk_arcs.stl
    • Micro105Quad_yk_base+Shields.stl
    • Micro105Quad_yk_base.stl
    • Micro105Quad_yk_propShield.stl
    • Micro105Quad_yk_top.stl

    Learn more about the formats

  • Publication date: 2018/03/26 at 12:46

License

CC BY

Creator

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!