M365 lock mount
- 4.5k views
- 2 likes
- 0 downloads
3D model description
M365 scooter lock holder.
Lock holder for Dechatlon bike lock. Simply lock the lock in the holder and don't worry.
The lock is B'TWIN 900 mini.
Might fit other locks. Lock dimmension:
90mm U-core to U-core centre
18mm diameter of U-core.
Why at an angle? So the scooter handlebar can still fold down.
To mount take of original plastic cover on the right side.
For mounting you can use original screws.
But what i did it was i used original screws for top reinforcement.
And at the bottom where you mount to frame i used longer M3,
25mm screws, so even if they unscrew,
the lock will keep them inside and will not unscrew completely.
The scooter is subjected to a lot of shaking, so tighten the screws
appropriately and maybe apply some screw glue that you can get in a hardware store.
But again they might untighten and if you get longer screws,
the lock will prevent them to unscrew completely/fall out.
I saw that all the screws on the scooter are glued. So this might be a smart move.
I didn't glue them for now, but might in the future.
3D printing settings
0.3mm layer height
top layers 4 and bottom 3
3 perimeter shells
No supports (depends on printer, might need support in some places,
i didn't use any and it printed almost perfectly)
Print in PETG, as it is more resistent to temperature
- 3D file format: STL
- Publication date: 2019/07/26 at 19:29
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!