Skip to content

LG V20 dock

?
Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1k views
  • 3 likes
  • 59 downloads

3D model description

Heavily inspired by chenhj's iPhone dock (which in turn was based on Daelmanu's, I decided to create a similar dock for the LG V20.

The dock is designed for use with a case (I'm using the Spigen Rugged Armor case), but with some small foam/felt padding you could use it without a case as well (which is probably a good idea if you're using it without a case, to prevent scratches).

The cable routing system is the same as the iPhone dock: feed the USB-C end of the original USB cable through the large hole at the bottom, then move the entire cable to the other portion of the cutout and pull the cable from below. Depending on what kind of case you have, you may need to play around with how far you want to pull it down.

3D printing settings

Printer:
Monoprice Maker Select v2

Rafts:
No

Supports:
Yes

Resolution:
0.16 mm

Infill:
15%

Notes:
I only used supports for the cable routing at the bottom. Note that the tolerances on the holes are very tight, so your printer must be dialed in fairly well to be able to successfully use it.

  • 3D file format: STL
  • Publication date: 2016/11/24 at 10:05

License

CC BY NC

Creator

Designs 5
Downloads 366
Sales US$48
Followers 6
Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment

2 comments

Depending on which case you're using, it may fit. This model fits the V20 with Spigen Rugged Armor case perfectly, so if your case and V10 are the same dimensions as the V20 and the Spigen case, it should work. Otherwise, you can always open the STL in a 3D editor and shave a little off from the inside. The USB connection is probably something you also need to double-check.

The V10 [159.6 x 79.3 x 8.6 mm (6.28 x 3.12 x 0.34 in)] is just a hair wider and thicker than the V20 [6.29 x 3.07 x 0.30 inches (159.7 x 78.1 x 7.6 mm)]. Do you think it would fit in this dock? Looks very nice in any case!


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!