A simple iPad or any tablet stand. I've included a second stand with a reinforced back arm extension. If you are printing using hard material, which snaps if bent, then print the reinforced model. If your material is flexible then the regular design should be fine. I've printed it using PETG, it is a bit flimsy but just the way I want it to be.
This is my second attempt printing with PETG. I've managed to get the object to stick to the printer board and reduced the stringing drastically. After some online research, I found that properly cleaning the surface with dish soap does the trick. There is no need for any type of glue. With the stringing, I will try to reduce the end's temp and see if that helps. One other factor I'm considering is retraction. I'll try to increase the retraction length.
The rest of the pecs could be found in the photos section.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!