Skip to content

Headphone Stand

3D model description

I saw Makerbot's headphone stand and thought that it wasn't very good looking or big enough. So I decided to make a 'better' headphone stand.

INSTRUCTIONS: There are three options.
1 - Folding Headphones: Print it in one piece to fit your bed - which may not be large enough for standard headphones. This is based on a 200x200mm print bed. Scaling to a 300x300mm print bed may be large enough to fit standard headphone sizes.

2 - Print Headphone_Stand-Tall.stl which should be tall enough for your headphones. This may be taller than your printer build area, so it is obviously dependent on your printer.

3 - Non-Folding Headphones: Print the 4 parts separately then glue together. The 4 separate parts are scaled larger to be big enough to fit standard headphones when assembled.
You may have to scale the file down to fit your print bed.

Orient the face you want to print on - Cura flatten to bed is located in the rotation menu. Simplify 3D flatten to bed is located in the edit menu (ctrl-L or apple-L). Other slicers... I don't know.

There are two main faces to print from. The easiest would be the back face. If you have amazing bridging capabilities on your printer then you can print it on the bottom face.

Print, use, enjoy!

  • 3D model format: STL



Followers Following 0
Downloaded 781

Design - Create - Make

YouTube Channel


Twitter: @Protean_Man

Instagram: @the_Protean_Man

Support Future Projects
If you find my designs worthwhile please consider supporting me in many ways:


Bitcoin: 1FcH8nUtqY2Hg6UmshpeXmDLj7wYQftauN
Ethereum: 0xd244ab685c97de6769c62de6dac1930f9dd00069
Litecoin: LKZe6AL8KTg3a86hJrsxTEaKiVAWJLCXT6



Similar 3D files

Best sellers of the category Gadget

Add a comment