Printed receiver for the GJ M24. This has been a long time in the making, and I'm proud now to release this design to the community.
Upgrades/changes over the stock receiver include:
-M3 hardware.. no more self tapping screws!
-Much beefier design, less hollow space inside.
-Sear pin position changed to better catch the bolt on high FPS builds
-Angled upper receiver and trigger guard, providing extra rigidity and cool aesthetics :)
-Cut out ejection port
-Space for a 10x2.5x125mm steel plate in the upper receiver to increase rigidity
To build a working M24 you will need:
All original parts from a M24, bolt, trigger, sear, mag release etc
-8x M3x12 bolts
-2x M3x8 bolts
-10x M3 lock nuts
Recommended that you take your time building it and use a small amount of silicone oil around the bolt/moving parts to make operation as smooth as possible.
If you have any questions, feel free to contact me on my facebook page :) https://www.facebook.com/nadda3dprints/
0.2mm layer height
50 percent infill
2mm top and bottom surfaces
Conical support on, support roof on
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!