Skip to content

FX Impact .22 mag

Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

My take on custom mags. You will need the following:
music wire size 10 or .024" to make wheel spring.
m4x10mm Philip flat head countersink screw
3x1mm magnets. 9 per mag. Holes in shell get 2 magnets per hole.
Cover gets single magnet per hole.
You will also need a drill bit close to .410" to use as a mandrel to wrap the spring around. I suggest wrapping the coils tight and touching, then gently pull the coils apart to get the right height. Both tails should be 180 degrees from each other

3D printing settings

.2-layer height
40% infill on cover and wheel
50% infill for shell.
I found tree supports to be easiest.
make sure shell is printing with open area facing up.
make sure the design of the wheel is facing the bed.
make sure the cover has the lip face pointed up

3D printer file information

  • 3D design format: STL Folder details Close
    • FX .22 Wheel v7.stl
    • FX .22 cover v8.stl
    • FX .22 shell v7.stl

    Learn more about the formats

  • Publication date: 2022-02-14 at 22:50





Designs 11
Downloads 9
Sales US$93.44
Followers 4
Issue with this design? Report a problem

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!